Rane MP2016A Rotary Mixer

Ecler Mixers, Rane Mixers & Serato Scratch, Vestax, Ortofon DJ Cartridges and Sennheiser Headphones

view cart

checkout

DJ Equipment > DJ Mixers > Rane Mixers > Rane MP2016A Rotary Mixer

Rane MP2016A Rotary Mixer

The Rane MP2016a is a rotary-controlled mixer featuring six Input Channels, Booth and House Outputs, Pre-Effects Tape Outputs, Post-Effects Tape Outputs with Level control, switchable Effects Loop, and Headphone Cueing. Input Channels 1 through 4 feature high quality RIAA phono preamplifiers which may be switched to line input via rear panel switches. Input Channels 5 and 6 each provide a balanced mic preamp with Input Gain trim, Mic/Line switch, two-band EQ, Mic Engage switch and an internal Booth Ducking enable jumper. In addition to the six dedicated preamplifiers, all six Input channels may select any of the five stereo Auxiliary Inputs.

Comes with 2 FREE djDevices.com slipmats and FREE delivery!!!

RRP: £1,521.63

OUR PRICE: £1,244.99 inc vat

Rane MP2016A Rotary Mixer Details

Each Input Channel provides a 6-position source selector, Input Gain control \n for matching levels, Signal/Overload indicators and a studio-grade Master Mix \n control.

\nThe Booth Output may select Master or Cue as its source. An ultra-low noise, \n high power headphone amplifier also allows monitoring the Master Mix or Cue \n Mix.

\nThe Rane MP2016a improves on the original Rane MP2016 by adding Split Cue. Individual \nCue switches on each channel drive a panning Master / Cue control for the Headphone \noutput.
\n
\nThe Master Mix circuit provides Signal/Overload indicators, Mono switch and \n high-pass/rumble filters. In addition, the Master Output features patent-pending \n high performance 3-band, full-cut, Accelerated-Slope tone controls.

\nThe Rane MP2016a provides exceptional ergonomics, good feel and a clean, intuitive \nlayout packaged in a compact 19 inch, 3U rack mount chassis, a scant five inches \ndeep.
\n
\nSo you say,"Great, but to accommodate the diverse needs of all DJ mixing \n styles, I need dedicated high performance three-band, full-cut, Accelerated-Slope \n tone controls for each of the six Input Channels, high-performance Active-Crossfader \n with full range contour control, A-Post-B crossfader assign switches and a stereo, \n 10-segment, peak dBu Master/Cue meter with peak hold; all without effecting \n the ergonomics of my classic rotary mixer."

\nWe've got you covered! With the flip of a switch on the Rane MP2016a front panel, \nyou can engage the optional XP 2016a External Processor and acquire all of these \nfeatures.
\n
\nThe XP 2016a is an optional external processor designed specifically for use with \nthe Rane MP2016a. The XP 2016a is intended to mount above or below the Rane MP2016a. \nIt connects with a single 10-inch ribbon cable and is engaged with the flip of \na switch on the MP 2016a front panel. If an XP 2016a is not connected, the XP \n2016a engage switch on the MP 2016a has no effect.
\n
\nThe XP 2016a provides dedicated Accelerated-Slope, 3-band, full-cut tone controls \n for each of the six stereo Input channels, A-Post-B Crossfader Assign switches \n for all six Input channels, a high-performance Active Crossfader with full range \n Contour control, and a stereo 10-segment peak dBu Master/Cue Meter with peak \n hold.

\nThe six stereo, post Mix Level signals in the MP 2016a are fed to the XP 2016a. \n When the XP 2016a is not engaged, the post Mix Level signals go directly to \n the Master Mix in the MP 2016a. When the XP 2016a is engaged, the stereo Master \n Mix comes from the XP 2016a.

\nIf all Input channels on the XP 2016a are assigned Post-Crossfader, the Mix \n will be identical to the MP 2016a (with the addition of tone controls for each \n Input channel). For Crossfader control, simply assign a channel to the A or \n B side of the Crossfader. The Active Crossfader features a full-range Contour \n control for smooth blending or ultra fast cuts.

\nThe Master/Cue Meter follows the source selection of the headphone monitor \n on the MP 2016a. If Master is selected, the XP 2016a Meter monitors the pre-house-level Master signal. If Cue is selected, \n the XP 2016a meter monitors the Cue Source.

\nThe XP 2016a matches the MP 2016a ergonomics, packaged in a compact 19 inch, \n 3U rack mount chassis, 5 inches deep.\n

\nFor more details visit - www.rane.com/mp2016a.html

ecler dj mixers
pioneer dj mixers
rane dj mixers
technics dj mixers
vestax dj mixers

pioneer cd players
technics cd players
vestax cd players

technics turntables
vestax turntables

ortofon cartridges & styli

sennheiser headphones

rane serato scratch live

vestax accessories

FREE Slipmats!!!